banner
Home » Knowledge » Content
Product Categories

Structure of the reaction kettle

- Aug 14, 2018 -

The reaction kettle is composed of a kettle body, a kettle lid, a jacket, a stirrer, a transmission device, an axle seal device and a support. When the mixing device is larger in the high diameter, it can be used to mix the paddle blades and optionally optional according to the user's requirements. A jacket is arranged outside the wall of the kettle, or the replacement hot surface is arranged in the device, and the heat transfer can be carried out through the external circulation. The supporting seat has a support type or an ear type bearing.

Speed more than 160 RPM should use gear reducer. The number of openings, specifications or other requirements can be based on user requirements design, production.

1. Usually under normal pressure or low pressure conditions using filler seals, the general use of pressure less than 2 kg.

2. In general medium pressure or vacuum conditions will adopt mechanical seals, the general pressure of negative pressure or 4 kg.

3. In high pressure or medium volatile conditions will use magnetic seals, the general pressure of more than 14 kg. In addition to magnetic seals are using water cooling, other seals in more than 120 degrees above will increase the cooling water cover.