Disk type horizontal sand mill for paint instruction: The disk type horizontal sand mill for paint uses a double mechanical seal for reliability and durability, and is equipped with a coolant compatible with the abrasive material to reduce contamination of the abrasive material. It is suitable...Send Inquiry
Disk type horizontal sand mill for paint instruction:
The disk type horizontal sand mill for paint uses a double mechanical seal for reliability and durability, and is equipped with a coolant compatible with the abrasive material to reduce contamination of the abrasive material. It is suitable for the grinding of materials in coatings, paints, inks, pesticides, etc. It can polymerize the particles of the materials and achieve the required fineness in a short time by strong grinding. The disk type horizontal sand mill for paint is easy to operate, has good reliability and high production efficiency, and can meet the needs of users.
Diaphragm pump/ Gear pump
1.easy to installation
2.Smooth operating with no noise
3.Strict quality management system
8.High quality products
1) Variety types for selection
2) Competitive price
3) Prompt delivery
How To Installation instructions
1. No need to locate the anchor screw, it can be placed at any time, but the foundation ground should be solid and flat.
2. When installing each model, there should be a distance of more than 1 meter around it to facilitate operation and maintenance and introduction of water and electricity.
3. Power supply: Each user should match the corresponding power line according to the purchased model, and it is recommended to install the fuse on each line.
4. Motor steering: It rotates clockwise (refers to the person standing at the tail of the fuselage and looking in the direction of the barrel). When the initial installation, the main motor can be jogged, and the steering should be consistent with the direction of the sign.
5. Turn on the cooling water pipe, tighten the joints, and add a shut-off valve before the total water intake to control the amount of water. Users can connect hoses or pipes according to their own site conditions.
6. Open the upper cover of the base and inject 10# of engine oil into the tank of the base.